Building Security System Flap Barrier Gate Turnstile Entry Systems
OEM Access Control System Biometric Recognition Retractable Flap
Barrier Turnstile
Technical specification
Model | |
Size | 1200*300*1000mm |
Material | 1.2mm SS304 |
Passage Width | 600mm |
Passage direction | Single directional/Bi-directional |
Pass rate | 30-35 persons/minute |
Operating time | 1 seconds |
Power input | AC100-240V, 50/60HZ, DC24V |
Working voltage | 24V |
Working humidity | 30%~95% |
Working temperature | -40℃~+70℃ |
Working environment | Indoor/outdoor |
Communication interface | RS485, Dry contact |
Mechanism | Mould machine core+mould bracket+Domestic solenoid |
Product description
Sinomatic flap barrier can be compatible with IC card , ID card
,barcode card , fingerprint reading card recognition device used
for staff, provide civilized , orderly access methods; effectively
manage the access of staff .
Sinomatic flap barrier gate can be widely used in the station,
wharf subway, factories, office building, hotel, clubs, intelligent
community , enterprises and institution that need intelligent
access management.
Product Advantages
1. Problem-self-checking function.
2. Barrier Opening: Bi-direction
3. When power off, arm open automatically and power on again, arm
will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to
close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger doesn't
pass within regulated time, turnstile will cancel order
automatically. And the regulated time can be set by managers.
6. Anti-rush function: if there is no open signal, arm will be
holding tightly.
7. Stable running with little noise.
MAIN FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and
maintenance.
2. The running status can be programmed and controlled with the
built-in keyboard on the main board.
3. Mechanical antipinch function. If the gate meets resistance in
the reset process,motors will stop working automatically
within the prescribed time and reset again after the default delay
(till fully reset)
4. Anti-breakthrough function. The gate is locked automatically
until opening signal received.
5. Synchronization functions (for dual gate equipment).
6. Automatic reset function. Should the user fail to pass within
the prescribed time, the system will cancel the authority
of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers,
bar codes, fingerprints, etc.
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on,
complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse
intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function
